Toy Steam Enignes.
Scratch build

  


Home
 Mamod 1
 Mamod 2
 Mamod 3
 Meccano
English Engines
Other Engines
Toy boats
 Accessories
 For Sale

 Contact me
 About me
 Guest book
 Links

Stuart Turner D10 marine engine.

Stuart Turner D10
Twin cylinder steam engine.

Height: 6 inch
Stroke: 3/4 inch
Bore: 3/4 inch
Flywheel Diameter: 3 inch


 


Stuart Turner S50 Mill Engine.
 

Stuart Turner S-50
Mill engine.

Length: 8  1/2  inches
Stroke: 1  1/4  inch
Bore: 5/8  inch
Flywheel Diameter: 3 inch
Stuart Turner 10H engine and boiler.
Stuart Turner 10H engine and boiler.
 		 Stuart Turner 10H Steam plant. Stuart Turner 10H Steam plant
This is a big lump
The Meccano engine is for scale.

Length: 6 inches
Stroke: 3/4 inch
Bore: 3/4 inch
Flywheel Diameter: 3 inch
Home made live steam Boiler.
 		 Home made Boiler and water pump. Home made Boiler and water pump
Pictured here with a Perseus engine
For scale.

Stuart Turner S-500 Babcock boiler.
Stuart Turner S-500 Babcock boiler.
 

Stuart Turner Steam engine and boiler.
Video Video of Clydon steam engine # 13/4.

Stuart Turner S-50  Mill engine
And a Stuart Turner S-500 Babcock boiler.

Length: 8  1/2  inches
Stroke: 1  1/4  inch
Bore: 5/8  inch
Flywheel Diameter: 3 inch

Stuart Turner Dynamo.

Stuart Dynamo.

Stuart Turner Dynamo.
RPM: 3000
Volts: 4
Amps: 1


Stuart Turner steam engine Circa 1929.
Stuart Turner Advert January 1929.

Stuart Turner steame engine.

Stuart Turner
Single cylinder
Live steam engine.

Height: 2  1/2 inches
Stroke: 7/16 inch
Bore: 7/16 inch
Flywheel Diameter: 1 inch


Model Steam Engine.

Model Steam Engine.
Video Video of Clydon steam engine # 13/4.

This steam engine was built by my father
Mr Geoffrey Stacey, It took him several years
Of Saturday afternoons to complete
The engine was first run on compressed air
On the 1st of July 1994
 It was first run on steam on the 6th of June 1997

This steam engine was constructed from scrap
Brass and copper
Virtually all the brass was cut from a gear box cover
And the girders where made from a old antique brass Mail box lid.

My father entered this steam engine in several model Engineering competitions and won a
Gold and two Silver medals.


Persues model steam engine.

Persues model steam engine.
Persues was made from castings
And is numbered 87 so an early model.

Persues Horizontal steam engine.

Bore: ¾ inch (19mm)
Stroke: 1 inch (25mm)
F/Wheel Diameter: 4 inch (101mm)
Valve type: Slide
 


Cheddar Models Ltd
Pipit Boiler.


Thomas Aveling Traction Engine.
The original box is solid wood
And nearly one inch thick.

Thomas Aveling Traction Engine.
 Video Thomas Aveling traction engine Circa 1970.

Thomas Aveling traction engine
Made by Victorian Models Ltd
Jersey, Channel Islands.
Circa 1970's.
 


Maxwell Hemmens Birmingham Dribbler.

Maxwell Hemmens
Birmingham Dribbler
Live steam engine
All brass construction
(Except for burner)
(The company no longer exists)
 


Maxwell Hemmens Birmingham Dribbler.

Birmingham Dribbler
New design safety valve.
(The company address was
Maxwell Hemmens
Thorganby York
y046da
England.
Maxwell Hemmens Birmingham Dribbler.
Maxwell Hemmens Birmingham dribbler box.
Maxwell Hemmens Birmingham Dribbler.		 Boxed set of
Maxwell Hemmens
Birmingham Dribbler castings.
(Note: The earlier castings came in a bigger box)
Maxwell Hemmens Birmingham Dribbler.
The later and smaller Maxwell Hemmens box.
Maxwell Hemmens Birmingham Dribbler.		 Boxed set of
Maxwell Hemmens
Birmingham Dribbler castings.
(The later smaller box of castings)
 
Maxwell Hemmens Birmingham Dribbler.		 My fleet of
Birmingham Dribbler steam toys.
 
Marine engine.

Lovely example of a
Scratch built marine engine.